Online Courses

We have selected and partnered with online training course vendors to provide clients with a convenient resource for internet-based training in general industry and construction.

OSHA 10 Hour Road Construction Online  

OSHA 10 Hour Road Construction Online Course Description: Road construction presents unique safety challenges as crews navigate equipment, traffic, and other on-the-job hazards. To ensure better safety levels for these workers, the Occupational Safety and Health Administration (OSHA) offers an Outreach Training Program to address common hazards, safety practices, and more. By taking the OSHA 10-Hour Road Construction course, participants can earn a Department of Labor (DOL)/OSHA 10-Hour Card and receive the training needed to prevent injuries and fatalities on the job.

Intended Audience: This 10-hour, OSHA Outreach course is designed for construction professionals working on road construction sites to perform road maintenance activities. These individuals include:

  • Road Builders
  • Road Construction Crews
  • Road Maintenance Personnel
  • Workers on publicly-funded projects of varying amounts in the following states
    • Connecticut (must re-certify every 5 years)
    • Massachusetts
    • Missouri
    • Nevada
    • New Hampshire
    • New York
    • Rhode Island
  • This course is not intended for general construction or general industry workers. Construction workers employed or seeking employment in New York City should register for the following courses per New York City Department of Buildings (NYC DOB) LL196 online course proctoring requirements.

Learning Objectives: TThe OSHA 10-Hour Road Construction course prepares participants to recognize, control, and prevent hazards commonly encountered on road construction worksites. 

Course Topics Include:

  • Introduction to OSHA
  • Special considerations for road construction safety
  • Common roadway construction safety and health hazards
  • Electrical hazards
  • Fall protection
  • Motor vehicle and mechanized equipment hazards
  • Cranes and aerial lifts
  • Excavations
  • Duties and responsibilities for confined space workers
  • Work zone traffic control
  • Lockout/tagout (LOTO) system requirements
  • Personal protective equipment (PPE)
  • How to be aware of, anticipate, and mitigate emergencies

Upon completion of this course, you will be prepared to identify and address common roadway construction hazards and follow OSHA safety standards while on the job. Additionally, successful participants will receive a DOL/OSHA 10-Hour Card.

Completion Requirements: OSHA requires 10 Hour online training to be completed within 6 months from the date when you start the course:

  • OSHA 10 Course Minimum Passing Score is 70%
  • You Have 3 Chances to Pass the OSHA 10 Online Test
  • You Receive Immediate Feedback on Incorrect Answers

Features and Benefits: OSHA 10 Hour Road Construction online safety course will help you recognize and control hazards common to road construction activities. When you have successfully completed this course, you will:

  • Be able to identify special hazards common to road construction
  • Understand the hazards common to road construction and maintenance
  • Use correct PPE
  • Know the duties and responsibilities of confined space workers
  • Be aware, anticipate and deal with emergencies expected in road construction environments
  • Receive a valid DOL/OSHA 10 Hour Completion Card

OSHA 10 Card: We keep your score and submits reports of all successful course completions to OSHA and the Department of Labor. DOL/OSHA Completion Cards are sent back for signature and then mailed directly to the student (cards typically arrive 6 to 8 weeks after the successful course completion date).

Course Length: 10 Hours

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $89.00

OSHA Outreach courses are provided in partnership with ClickSafety, an OSHA authorized online Outreach provider.

OSHA 30 Hour Construction Online  

OSHA 30 Hour ConstructionOnline Course Description: The OSHA 30-Hour Construction course provides a proven path to receiving an OSHA student completion card from the Department of Labor (DOL)/Occupational Safety and Health Administration (OSHA) Outreach Training Program. With a convenient online course, construction workers, managers, employers, and related personnel receive the training in job site hazards, protection, and safety culture needed to avoid workplace accidents, injuries, and deaths.

Intended Audience: This online OSHA 30 Construction course will benefit all workers and management at a construction office or work site. This 30 Hour online course is intended for supervisors or workers with some safety responsibility.

  • Construction Workers
  • Construction Foremen
  • Construction Job Supervisors
  • All Personnel Responsible for Construction-related Projects

Learning Objectives: The OSHA 30-Hour Construction course prepares workers, managers, and employers to recognize, avoid, abate, and prevent health and safety hazards commonly encountered on construction worksites. 

Following this OSHA 30 training course, the student should be able to:

  1. Specific steps and requirements needed to complete the OSHA 30-Hour Outreach Training Program
  2. Introduction to OSHA
  3. Workers’ rights and employer responsibilities
  4. Health and safety program requirements
  5. Compliant reporting and record-keeping
  6. How to file a complaint
  7. The role of a Competent Person
  8. Focus Four Hazards (fall hazards, electrocution hazards, caught-in or –between hazards, struck-by hazards)
  9. Materials handling safety, including activities causing MSD and RMD injuries and illnesses
  10. Cranes and rigging
  11. Motor vehicle, mechanized equipment, and marine hazards
  12. Motorized mobile platforms
  13. Excavations
  14. Work zone traffic control
  15. Forklift hazards
  16. Identifying major construction health hazards
  17. Hand and power tool hazards
  18. Concrete and masonry hazards
  19. Major steel erection hazards
  20. Welding and cutting hazards
  21. Confined space hazards
  22. Arc flash hazards
  23. Hazard mitigation
  24. Lockout/Tagout (LOTO) procedures
  25. How to select and use personal protective equipment (PPE)
  26. The roles of management and the workforce in promoting a positive safety culture

Completion Requirements: OSHA requires 30 Hour online training to be completed within 6 months from the date when you start the course:

  • OSHA 30 Course Minimum Passing Score is 70%
  • You Have 3 Chances to Pass the OSHA 30 Online Test
  • You Receive Immediate Feedback on Incorrect Answers

OSHA 30 Card: Upon completion of the OSHA 30-Hour Construction course, participants will be ready to recognize, avoid, abate, and prevent most construction job site hazards. Additionally, they will better understand worker’s rights and employer responsibilities. All successful course participants will receive:

  • A certificate of completion that verifies a passing score of at least 70%
  • Three (3) Continuing Education Units from an accredited IACET provider
  • A plastic wallet DOL/OSHA 30-Hour completion card

Every individual will be given three chances to pass the course’s final test, and immediate feedback is provided when wrong answers are submitted.

You must complete the course evaluation at the end of the course to receive a certificate of completion. Every participant must complete the 30-hour course within six months of the start date.

OSHA 30 Card: After you meet passing requirements, our proven process makes it easy to get your DOL/OSHA 30-Hour card. We’ll record your score and submit reports of successful course completions to the DOL and OSHA for each participant. Cards will be sent to us for signing and distribution, after which we’ll mail yours directly to you. In general, DOL/OSHA 30-Hour Cards arrive within six to eight weeks after completion of your course.

Course Lenght: 30 Hours

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $189.00

OSHA Outreach courses are provided in partnership with ClickSafety, an OSHA authorized Outreach provider.

OSHA 30 Hour Construction Voice-Authentication Online  

OSHA 30 Hour Construction Voice-Authentication Online Course Description: OSHA 30 Hour Construction is an OSHA-Authorized online course featuring the required steps for completing OSHA Outreach training. This online training covers everything from Electrical Hazard Safety to Fall Protection. Our OSHA 30 Hour Construction online course is a proven way to receive a valid OSHA 30 Hour Card and achieve the safety level required by your company for work in the construction industry.

Intended Audience: This online OSHA 30 Construction course will benefit all workers and management at a construction office or work site. This 30-Hour online course is intended for supervisors or workers with some safety responsibility.

  • Construction Workers
  • Construction Foremen
  • Construction Job Supervisors
  • All Personnel Responsible for Construction-related Projects

Learning Aids: OSHA 30 Hour Construction online safety course trains workers and employers on recognition, avoidance, abatement and prevention of safety and health hazards in the workplace. It includes information on workers' rights, employer responsibilities and how to file a complaint. This course gives you the specific steps and requirements you must meet to complete the online OSHA30 Outreach training program.

Following this OSHA 30 training course, the student should be able to:

  1. Recognize what worker rights are protected under OSHA
  2. Recognize what responsibilities an employer has under OSHA
  3. Identify major fall hazards
  4. Identify common caught-in or -between hazards
  5. Identify common struck-by hazards
  6.  Identify types of electrocution hazards
  7. Identify ways to select appropriate PPE and lifesaving equipment
  8. Identify major health hazards common to the construction industry
  9. Recognize how to protect oneself from material handling hazards
  10. Identify major hand & power tool hazards
  11. Recognize role of the workforce in improving the current culture
  12. Recognize the role of management in improving the current culture
  13. Recognize ways to protect oneself from crane hazards
  14. Identify major hazards related to motor vehicles, mechanized equipment and marine operations
  15. Recognize ways to protect oneself from fire hazards thru prevention and emergency response
  16. Recognize employer requirements for protecting workers from concrete & masonry hazards, including abatement methods
  17. Identify major steel erection hazards
  18. Recognize ways to protect oneself from welding & cutting hazards
  19.  Describe types of confined space hazards
  20. Recognize ways to protect oneself from confined space hazards
  21. Describe activities that can lead to MSD and RMD injury and illness
  22. Recognize employer requirements for providing a safety and health program that effectively reduces and prevents employee injury, illness, and fatality
  23. Identify responsibilities of a supervisor in preventing worker injuries and unhealthful exposures
  24. Recognize the specific legal responsibilities of a supervisor to protect worker safety and health
  25. Identify the reasons for an incident investigation and future preventative measures that may result
  26. Recognize ways to protect oneself from arc flash hazards
  27. Describe types of health and safety construction hazards and appropriate forms mitigation

Course Topics

  • Introduction to OSHA
  • Contractor's Safety and Health Program
  • Reporting and Record Keeping
  • Electrical Hazards
  • Fall Protection
  • Materials Handling
  • Cranes and Rigging
  • Motorized Mobile Platforms
  • The Competent Person
  • Excavations
  • Work Zone Traffic Control
  • Forklift Hazards

Completion Requirements: OSHA requires 30 Hour online training to be completed within 6 months from the date when you start the course:

  • OSHA30 Course Minimum Passing Score is 70%
  • You Have 3 Chances to Pass the OSHA 30 Online Test
  • You Receive Immediate Feedback on Incorrect Answers

Features and Benefits: OSHA 30 Hour Construction online safety course is a certificate-level review of occupational safety and health for construction workers. When you have successfully completed this course, you will be able to:

  • Recognize, avoid, abate and prevent safety and health hazards in the workplace
  • Follow OSHA construction industry standards
  • Be aware of company policies that may be different than the ones discussed, sometimes more stringent

OSHA 30 Card: Passing this course also means you will receive a valid OSHA 30 Hour card. We make it simple for you by recording your score and submitting all the necessarily information to process your DOL card. After receiving and signing your completion card, we will mail it to you directly – a process that typically takes six to eight weeks after the date of your successful course completion.

Course Length:  30 Hours

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $189.00

OSHA Outreach courses are provided in partnership with ClickSafety, an OSHA authorized online Outreach provider.

OSHA Compliance Basics for Construction Online  

OSHA Compliance Basics for Construction Online Course Description: In this advanced online safety course, you will learn the basics of Occupational Safety and Health Act and Administration compliance. This OSHA Compliance course focuses on ways to prevent and minimize occupational fatalities, injuries, and illnesses. It is important that a supervisor is able to take action to anticipate, recognize, evaluate, analyze and protect employee safety and health according to the OSHA Act.

Intended Audience: OSHA Compliance online training is designed for supervisors and managers who are responsible for the safety of their job site according to OSHA regulations.

  • Foremen in All Industries
  • Supervisors in All Industries
  • Managers in All Industries

Learning Aids: In this online safety course, we will inform you on the basics of OSHA compliance. You will also learn employer and employee rights and responsibilities according to OSHA, ensuring safety to the highest possible standard in the workplace. When finished, you will have been provided with the knowledge you need to take action, to anticipate, recognize, evaluate, analyze and protect employee safety and health.

Course Topics

  • Introduction to OSHA Compliance
  • Rights and Responsibilities
  • Standards
  • Inspections
  • Appeals and Requirements
  • Reporting and Other Issues
  • Final Considerations about OSHA Compliance

Features and Benefits: By taking OSHA Compliance Basics online safety course, you will be taught the importance of complying with OSHA requirements as a supervisor. After you finish this course successfully, you will:

  • Be familiar with the Occupational Safety and Health Act and Administration
  • Have basic occupation safety and health information
  • Know the history of occupational safety and health rules

Upon successful completion of the course, each student has the ability to access and print your Completion Certificate at any time, 24/7.

Course Length: 60 Minutes

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $50.00

OSHA Focus Four Hazard Awareness for Construction Online 

OSHA Focus Four Hazard Awareness for Construction Online Course Description: Because of the tasks performed and the equipment used, construction sites can be a dangerous place unless special care is taken in safety training and hazard prevention. Most job site fatalities are the result of four common hazards identified by the Occupational Safety and Health Administration (OSHA) as the Focus Four. By taking OSHA Focus Four Hazard Awareness for Construction, workers, supervisors, and managers learn how to identify and prevent these hazards, including electrical hazards, fall hazards, struck-by, and caught-in or –between dangers to minimize the risk of serious injury or death in the workplace.

Intended Audience: This course was designed for members of the construction workforce who are responsible for workplace safety per OSHA regulations, including the following:

  • Managers
  • Supervisors
  • Workers

Learning Aids: With greater awareness of OSHA’s Focus Four Hazards, course participants can help reduce on-the-job accidents and injuries.

Course Topics

  • OSHA’s Focus Four Hazards
    • Electrical hazards
    • Fall hazards
    • Struck-by hazards
    • Caught-in and caught-between hazards
  • Hazard identification
  • Hazard prevention
  • How to follow a Safety and Health program

Features and Benefits: After participants complete this course, they will be able to describe OSHA’s Focus Four Hazards and understand how to avoid them on the job. Additionally, they will learn more about common injuries caused by these hazards and how to prevent accidents that could lead to physical harm or fatalities.

Upon successful completion of the course, each student has the ability to access and print your Completion Certificate at any time, 24/7.

Course Length:  25 Minutes

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $25.00

Personal Protective Equipment Awareness for Construction Online 

Personal Protective Equipment Awareness for Construction Online Course Description: From gloves and goggles to face shields, hard hats, and respirators, members of the construction workforce must know which protective equipment to wear and when. Personal Protective Equipment Awareness for Construction reviews key safety requirements, so construction workers and employers can protect themselves at work. Conveniently available online, our PPE training course takes just 10 minutes to complete and will instill important knowledge into every student that will become useful in a variety of situations.

Intended Audience: Designed with information specific to the construction industry, this personal protective equipment training course is intended for:

  • Construction Workers
  • Construction Foremen
  • Construction Supervisors

This course is not meant for employees and employers working in the general industry. Instead, these individuals can take advantage of our Personal Protective Equipment for General Industry course, which contains lessons geared towards the nuances of PPE outside of construction.

Learning Aids: Personal protective equipment (PPE) is an integral part of working safely on any job site. This introductory course provides students with the most pertinent information on how to choose, wear, and maintain PPE, as doing so properly could save lives. The topics covered include:

Course Topics

  • PPE requirements according to Occupational Safety and Health Administration (OSHA) standards
  • OSHA and American National Standards Institute (ANSI) rules and regulations for PPE use to protect the head, face, ears, eyes, body, hands, and feet
  • Types of specialized equipment and when to use it
  • How to identify risks associated with the failure to select the correct PPE
  • Methods for conducting situational analyses, which help to determine which PPE is appropriate for any given situation

Features and Benefits: Personal Protective Equipment for Construction takes just 10 minutes to complete, making it simple for construction workers and employers to fit it into their busy schedules. Upon completion, you will have a deeper understanding of the relationship between PPE and basic job site safety and be able to correctly select and utilize the various options for PPE.

Upon successful completion of the course, each student has the ability to access and print your Completion Certificate at any time, 24/7.

Course Length:  10 Minutes

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $25.00

Power Tool Safety Awareness for Construction Online 

Power Tool Safety Awareness for Construction Online Course Description: Power Tool Safety Awareness for Construction is an introductory online course that teaches hand and power tool safety, types of power tools, dangers, and uses and limitations. Power tools can cause injuries and accidents, which means hand power tool safety is an important concern when working. You will be informed of PPE and OSHA’s safety regulations regarding the use of power tools.

Intended Audience: This online safety course is part of a hand and power tool safety program intended for construction workers and managers at the job site.

  • Construction Workers
  • Construction Foremen
  • Construction Supervisors

Learning Aids: Power Tool Safety Awareness is an online power tool safety course regarding the dangers involved in using power tools. You will also be informed of the importance of using PPE to work safely. Hand power tool safety is important as power tools are often necessary to complete a task yet can cause injury if not properly used and maintained.

Course Topics

  • Introduction to Power Tool Safety
  • Types of Power Tools
  • Final Considerations

Features and Benefits: Power Tool Safety Awareness for Construction online training course covers portable power tool safety and minimizing the hazards involved with these tools. After successfully completing this course, you will understand the following:

  • The potential hazards of power tools
  • Proper PPE is needed while using power tools
  • Safe operating procedures while using power tools
  • Regular tool maintenance is needed

Upon successful completion of the course, each student has the ability to access and print your Completion Certificate at any time, 24/7.

Course Length:  10 Minutes

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $30.00

Power Tool Use and Guarding for Construction Online  

Power Tool Use and Guarding for Construction Online Course Description: Power Tool Use and Guarding for Construction is an intermediate online safety course. You can expect to learn hand and power tool safety procedures, with reference to applicable OSHA, ANSI and NIOSH requirements. You will review the proper use of various hand and power tools, as well as case studies highlighting their hazards and proper precautionary measures. You will also be shown best practices for ensuring safe working conditions in this online experience.

Intended Audience: This course is designed for any construction workers who uses, selects, maintains, and inspects hand and portable power tools.

  • Construction Workers
  • Construction Supervisors
  • Construction Managers

Learning Aids: In this Power Tool Use and Guarding for Construction online safety course, we will review the correct forms of protective equipment needed for various hand and power tools. Upon successful completion of this course, you will be able to identify how to safely operate hand and power tools within their proper working environments.

Course Topics

  • Introduction to Power Tool Use and Guarding
  • Case Study on PPE & Hand Tools
  • Types of Mechanical Hazards
  • Precautionary Measures
  • Types of Tools
  • Case Study on Power Tool Electrocution
  • Case Study on Portable Grinder Accident
  • Pneumatic Tools
  • Liquid Fuel and Powder-Actuated Tools
  • Case Study on Power Tool Fatality
  • Hydraulics and Mixers

Features and Benefits: By completing Power Tool Use and Guarding for Construction online safety course, you will be better prepared to identify various hazards, basic safety procedures and safeguards for operating hand and portable power tools. Case studies review tool-specific accidents and help illustrate key points for hazard protection. Upon successful completion, you will:

  • Understand the proper method for safely handling specific tools
  • Analyze case studies to identify proper preventive measures for accidents
  • Know the hazards of working with hand and portable power tools
  • Be able to recognize hazards and know basic safety procedures

Upon successful completion of the course, each student has the ability to access and print your Completion Certificate at any time, 24/7.

Course Length: 45 Minutes

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $40.00

PPE Common for Construction Online  

PPE Common for Construction Online Course Description: Personal Protective Equipment (PPE), Common is an intermediate online safety course that focuses on the types of personal protective equipment you can use to protect yourself from construction hazards and how to avoid injury in the workplace. You will be informed of OSHA’s regulations regarding common personal protective equipment. In addition, you will be familiarized with the correct equipment to use for the head, eyes and face, arm and hand, and foot and leg protection.

Intended Audience: This online protective equipment course is designed for any worker who uses, selects, maintains, and inspects PPE and is responsible for following OSHA regulations.

  • Construction Workers
  • Construction Supervisors
  • Construction Managers

Learning Aids: This online safety course will teach you about the types of PPE available and how to select the proper equipment for your specific job. You will be informed of how to properly use, maintain, and store the PPE. In addition, you will be provided with general PPE issues and the proper use of the equipment.

Course Topics

  • Introduction to Personal Protective Equipment, Common
  • General PPE Issues
  • Head Protection
  • Eye and Face Protection
  • Emergency Eye and Body Wash
  • Arm and Hand Protection
  • Foot and Leg Protection

Features and Benefits: By taking Personal Protective Equipment (PPE), Common online safety course, you will learn the proper way to use and maintain PPE. When you have successfully completed the course, you will:

  • Be familiar with OSHA and ANSI requirements
  • Know how to properly use personal protective equipment and what class of equipment should be worn for particular jobs
  • Understand the importance of how to maintain your PPE equipment in these personal protective courses and how your equipment must be stored correctly

Upon successful completion of the course, each student has the ability to access and print your Completion Certificate at any time, 24/7.

Course Length: 60 Minutes

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $40.00

PPE Specialized for Construction Online  

PPE Specialized for Construction Online Course Description: PPE Specialized for Construction is an intermediate online safety course focusing on hearing, respiratory, body and fall protection equipment. You will be instructed on the correct high visibility apparel and protective equipment to wear when working in or near water. This course will familiarize you with OSHA’s regulations regarding specialized PPE.

Intended Audience: This PPE Specialized for Construction online safety course is designed for construction workers and managers who use, select, maintain and inspect personal protective equipment.

  • Construction Managers
  • Construction Supervisors
  • Construction Workers

Learning Aids: This protective equipment online course teaches the types of specialized PPE and how to properly select PPE for your specific jobs. You will be informed how to properly use, maintain, and store your PPE equipment. In addition, this course will focus on specialized PPE, which includes hearing protection, respiratory protection, fall protection, high visibility apparel and drowning protection.

Course Topics

  • Overview of Specialized Personal Protective Equipment (PPE)
  • Hearing Protection
  • Respiratory Protection
  • Body Protection
  • Fall Protection
  • High Visibility Apparel
  • Working Over or Near Water

Features and Benefits: By taking PPE Specialized for Construction online safety course, you will learn the types of specialized PPE available to use in different work situations. When you have successfully completed this course, you will:

  • Be familiar with specialized PPE to protect your hearing, keep you safe from falls, respiratory apparatus, high visibility apparel and how to work safely near water
  • Understand how to choose the right equipment for different types of construction jobs.
  • Know how to maintain and store your PPE equipment so it does not fail you

Upon successful completion of the course, each student has the ability to access and print your Completion Certificate at any time, 24/7.

Course Length: 45 Minutes

Registration: To enroll in this course please follow our Course Registration link below, and provide the information requested.

Pricing: $40.00

208.465.0215